Opetus ajotietokoneen kautta A(120)/O(200) Ohje A(120): 1. Place the car for 20 min.2. Drive between 32 km/h (20 mph) and 70 km/h (43 mph) until the new sensor IDs are learned by the car.3. It should take up to 20 min. Do not exceed 70 km/h during that time.Note: The front and rear axle placard (nominal) pressure values can be modified at the dashboard. In the menu settings, look for Tire Pressure Monitoring System. Enter that menu and you will have a list containing Nominal Value Front, Nominal Value Rear, Measuring Units and Start Reset. Select Nominal Value Front and Rear to set the desired nominal pressure value for each axle and then drive as described above. The Start Reset option is to clear the temperature nominal value previously stored in the ECU if you adjust the front and rear nominal pressure values.
