Opetus OBD-portin kautta. O(202) Ohje O(202): 1. Inflate all tires slightly above the recommended value in placard.2. Place tool close to Left Front valve location.3. Drop Left Front sensor pressure.4. While doing step 3, diagnose sensor ID using tool.5. Repeat steps 3 & 4 for Right Front, Right Rear and Left Rear.6. Connect tool to OBDII port.7. Use Tool to write in new IDs into ECU.8. Igntion OFF then ON.9. Make sure all tires are inflated to the recommended value as in placard.10. Drive at 20 km/h (12 mph) for up to 5 Min.NOTE: The above is a generic OBD procedure applicable for all TPMS diagnostic tools that support OBD II relearn for this model. In order to see if the Cub OBD II Module supports the vehicle, please check the column "OBD II (Cub Module Support)" next to the column "Relearn Type" on the Coverage List.
