Opetus OBD-portin kautta. O(203) Ohje O(203): 1. Inflate all tires to the recommended value in placard.2. Diagnose Left Front sensor ID using tool3. Repeat step 2 for Right Front, Right Rear and Left Rear.4. Check that the MAIN/2ND switch (which is located in the glove compartment) is in the UP position (system is in MAIN mode).5. Connect tool to OBDII port.6. Use Tool to write in new IDs into ECU.7. Igntion OFF then ON.8. Drive at 20 km/h (12 mph) for up to 5 min.NOTE: The above is a generic OBD procedure applicable for all TPMS diagnostic tools that support OBD II relearn for this model. In order to see if the Cub OBD II Module supports the vehicle, please check the column "OBD II (Cub Module Support)" next to the column "Relearn Type" on the Coverage List.
