Opetus ajotietokoneen kautta O(207)/A(132) Ohje A(132): 1. Park the car in a safe location and turn it off. Wait at least 15 minutes and then start the relearn procedure.2. Turn the ignition on (engine off).3. With the left and right arrow buttons on the steering wheel, select Configuration (gear icon).4. With the up and down arrow buttons on the steering wheel, select "Vehicle Settings" and press and hold the OK button.5. With the up and down arrow buttons on the steering wheel, select "TPWS Settings" and press the OK button.6. With the up and down arrow buttons, select "Wheel and Position Identification". Then, press and hold the OK button until the TPWS telltale blinks 3 times. During the relearn process, the TPWS telltale will blink for approximately 1 minute and will remain lit after that. Besides, the multi-information display will show "--" as pressure value next to each tire.7. Drive at 40 km/h (25 mph) during 10 to 30 minutes in a straight line with eventual curves. Do not exceed 70 km/h (43 mph) during that time. The relearn will be completed when the TPWS telltale is extinguished and the pressure values appear next to each tire. The relearn process completion may take in some cases more than an hour, especially in situations when the vehicle is stopped frequently at traffic lights.
